Current Drivers

This section contains the files and instructions for installing Overland Storage libraries in Windows 2000.

The Windows 2000 driver provides medium changer functions when using the Windows 2000 Backup utility and Removable Storage Manager with Overland Storage Tape Libraries.

The Fibre Channel Option (FCO) driver removes the "New Hardware Found" wizard dialog box on Windows 2000.

Windows 2000 SCSI Driver for Medium Changers

Note: This driver should NOT be used with third party backup and restore software programs unless specifically required by the software installation instructions. If in doubt, consult with the software vendor.

Provides medium changer functions when using the Window 2000 Backup Utility and Removable Storage Manager with Overland Storage Tape Libraries.

Windows 2000 – to request the driver, please fill out our contact form and choose Customer Support for the Department.

The following files are included in the self-extracting zip files:

libxprmc.inf	Installation script
libxprmc.sys	Overland Storage Medium Changer Driver
install.txt	Installation instructions

The models that have been tested with the Windows 2000 SCSI Driver are:

LibraryPro (All Models)
LoaderXpress (All Models)
PowerLoader (All Models)
LXB4110 / LXB4210
LXB7110 / LXB7210
LXB8110 / LXB8210
LXE44226 / 47226
LXE74452 / 77452
LXM4115 / LXM4215
LXM7115 / LXM7215
LXM8115/ LXM8215
LXN2000
LXN4000

To access Microsoft Windows 2000 TechNet Technology Center, click here

Fibre Channel Option (FCO) Driver for Windows 2000

Removes 'New Hardware Found' wizard dialog box that pops up on Windows 2000 systems when you have an FCO card (or SANPiper) installed. Attached is a 'driver' that we put together to eliminate this situation. When the wizard asks for a driver, use this file.

Click here to download

Obsolete Drivers

This section contains the files and instructions that allow the use of Overland Storage DataTools for DOS software in Windows NT with the tape models listed below.

Windows NT SCSI Driver for DataTools for DOS

Windows NT 3.5 and 4.0 – click here to download

(Includes subdirectories for i386 and Alpha platforms – Execute with the –d switch to create the required subdirectories)

oemsetup.inf	Installation script
oditape.sys	Tape class driver
nttapext.dll	Library of tape functions
nttapext.exp	Library of tape functions
nttapext.lib	Library of tape functions
oditvdd.dll	Virtual device driver
readme.txt	Installation instructions

The tape models that work with the Windows NT SCSI Driver for DataTools for DOS are:

OVERLAND 5622 / 5624 / 5612 / 5614 / 5212 / 5214
OVERLAND 995
OVERLAND T480 / T490 / T490ACL
OVERLAND L490 / L490E
DEC TKZ60 / TKZ60L / TKZ60C / TKZ60CL / TSZ07